CARE & MAINTENANCE
Follow the care tag instructions
attached to your specific product.
For breathable knit covers only:
Machine wash in cold water. Gentle
cycle only. Line dry only.
For woven cotton covers only:
Spot clean cover only. Use mild soap
and water. Line dry only. Do not
launder.
For vinyl laminate covers only:
Wipe down mattress surface with a
damp cloth. Line dry only. Do not
launder.
PULL WRAPPER TO OPEN PACKAGE
crib & toddler mattress-in-a-box
P
Manufactured, distributed and warranted by Kolcraft Enterprises, Inc., a licensee of Sealy Technology LLC.
1
Slide compressed crib mattress out of
the box.
2
Pull the outer wrapper at the thick seam to
unroll the crib mattress. use a knife
or scissors to cut this, it will unroll easily.
4
Cut the bag at the sealed edge with scissors,
careful not to cut any of the crib mattress
edges. Remove the outer bag and discard.
3
Roll out the compressed crib mattress.
5
The crib mattress will take shape within 5 minutes.
6
maintain quality. To assemble the cover on the crib
mattress, slide the cover over the foam core.
8
After the crib mattress is completely rolled out
and the cover is securely zipped closed, place
into baby’s crib or toddler bed.
7
Fully close the zipper around the crib mattress core.
Allow up to 48 Hours for the mattress to
return to its fully intended size before using.
0871794-R3
You may put the cover on the crib
of expansion, or wait longer for it to
into the cover.
cover
can be put on either side.
The
INFANT / L'ENFANT. It is visible
with arrows pointnig to the
infant side.
Butterfly
™
WARNING
sourced materials
Lightweight
Premium Foam
To Next Page
Need help?
General
