To Next PageTo Next Page
Need help?Do you have a question about the Seamaid COLOR and is the answer not in the manual?
General| Brand | Seamaid |
|---|---|
| Model | COLOR |
| Category | Lighting Equipment |
| Language | English |
Press clips to remove the front cover (2).
Unscrew and remove the outlet fitting (3) from the wall inlet (5).
Install the back support (4) aligning the top hole on the wall inlet (5).
Hand tighten the outlet fitting (3) against the pool wall (4).
Adjust top hook, then press clips to secure the front cover (1).
Connect the cable (6) to the transformer (7) plug.
Connect the transformer (7) to a secure 220/230 VAC outlet.
Ensure pool has compatible fitting; avoid flexible PVC pools. Use protected outlets.
Transformer must be 3.50m from pool, protected from water splash, and grounded.
Never touch the transformer with wet hands. Ensure no one is in the pool during installation.
It is recommended to disconnect the transformer from the socket after each use.
Manual program with 7 static colours and 3 controlled atmospheres via remote.
Max 10m range, avoid metallic parts/immersion. Alternative control via power switch.
Overview of buttons: O (Off/On), S (Synchronization), C (Colour), P (Programs).
Steps to pair remote with projector: power cycling, button press, battery insertion.
Developed by French R&D, manufactured in China with quality control and TÜV certification.
Guaranteed 24 months exchange, exclusive development, friction-soldered plastic parts.
