1 | P a g e
Seamax Inflatable Boat Cover Manual
Congratulations on your purchase of the Seamax Boat Cover, one of the best methods of protecting your inflatable boat from
elements is with a well-designed and good quality cover. Covering the boat from sun damage and oxidation prevents dirt from setting
on the interior and exterior and keeps moisture from causing mildew or rot to the surfaces. A nice boat cover is always a wise
investment. Please take a few moments to read these instructions to become familiar with it using.
Important Safety Instructions
To guard against injury, basic safety precautions should be observed:
1. This boat cover is NOT intended to be used as a travel cover. It is intended use is to protect your boat from the elements.
2. Tie down cords or straps are not included with the package. Be sure to use, tighten and secure all straps and hooks when
transporting your boat on a trailer or open vehicle. Failure to do this may cause the cover to blow off, become damaged or cause
injury to others. Our product warranty does not cover any kind of loss or liability in such a situation.
3. Only use soapy water or fresh water to wash the cover. The manufacturer is not responsible for damage caused as a result of
improper use or failure to observe these instructions.
4. Keep the product out of the reach of children. There may be a risk of small children choking or suffocating if they become
entangled in the cover. Please SAVE this instruction manual.
MODELS: Seamax inflatable boat covers have 6 series. Each series includes a couple of sizes for different tube styles. Those sizes
should be the same width. Read the “Model List” below to all our cover sizes. The bow style will not affect the cover size in most
cases.
UNIVERSAL COVER: No matter which brand of boat you have, even if it is a RIB with a console, our universal cover should fit as
long as your inflatable boat has a built-in transom. If you don't see a listing for your boat's measurements, please contact the seller.
MOTOR WELL DESIGN & TRAILERABLE: Our boat cover should be able to cover your boat and the motor. The covers have been
designed to fit the boat and its max rating outboard motor. Fabric Specs - Water repellent, mildew and UV resistant; Density
600D/260g/SQM. Elastic string design for quick fitted and released, Multiple Tie-Down Loops built-in, free cover carrying bag
included. Max trailer Road Speed 65km / hour (40mile / hour), additional tie-down core will be required.
Models & Dimensions Check List
A Series – for Boat’s Beam Width Range 4.3 to 4.6 feet
Model & Max Length: A210 – 6.9ft; A240 – 7.9ft; A265 – 8.7ft
B Series - for Boat’s Beam Width Range 4.7 to 5.2 feet
Model & Max Length: B255 – 8.3ft; B270 – 9.0ft; B295 – 9.7ft; B320 – 10.5ft; B350 – 11.5ft
C Series - for Boat’s Beam Width Range 5.3 to 5.7 feet
Model & Max Length: C300 – 9.9ft; C330 – 10.8ft; C360 – 11.8ft; C390 – 12.8ft; C420 – 13.8ft
D Series - for Boat’s Beam Width Range 5.8 to 6.4 feet
Model & Max Length: D370 – 12.2ft; D400 – 13.1ft; D430 – 14ft; D470 – 15.4ft; D500 – 16.5ft
E Series - for Boat’s Beam Width Range 6.6 to 7.2 feet
Model & Max Length: E460 – 15ft; E500 – 16.5ft; E550 – 18ft; E600 – 19.7ft; E680
F Series - for Boat’s Beam Width Range 7.6 to 8.4 feet
Model & Max Length: F550 – 18ft; F600 – 19.7ft; F680 – 22ft; F750 – 24ft
To Next Page
Need help?
General