To Next PageTo Next PageWhat to do if my Seamax SUP20S PRO air pump cannot be started normally?
If your Seamax Power Tool air pump won't start, here's what to check: 1. Ensure the power wire is correctly plugged into the 12V DC socket. 2. Replace the fuse in the DC plug if it's burnt out. 3. If the motor has overheated or is overloaded, allow it to cool down before restarting.
Why is my Seamax SUP20S PRO Power Tool inflating slowly or abnormally?
If your Seamax Power Tool is inflating slowly or abnormally, consider these potential causes: * The hose might be blocked or cracked. Replace the hose or remove the blockage, and inspect for cracks. * The joint between the hose and the air pump or the inflatable product may not be properly installed. Reinstall the hose to ensure a secure connection. * Verify that the power source meets the pump’s requirements of 12V 15A. Do NOT use compact AC to DC wall convertors to power the pump. Connect the pump car charger adapter directly to a car’s charger socket. Or use a well charged minimum 12V 7AH external lead acid battery with the optional 12V battery connector.
General| Brand | Seamax |
|---|---|
| Model | SUP20S PRO |
| Category | Power Tool |
| Language | English |
Basic safety precautions to prevent injury, electrical shock, or fire.
Max pressure, power source, stages, auto-stop, return policy.
Steps for connecting the air hose and power source.
Table detailing events and their audible/visual feedback.
Pump stops if voltage is out of range or internal temp exceeds 85°C.
Pump stops if pressure doesn't increase adequately, ensuring airtightness.
Details the 6 different O-ring sizes for valve adaptation.
Information on the available 6AH lithium cell power supply.
Lists all items included in the package and identifies key parts.
Details the location and function of the 12V 12A fuse in the charger adapter.
Guidance on initial use, test runs, and operational limits.
Instructions on connecting the hose and operating the pump for inflation.
Addresses problems like pump not starting or slow inflation with corresponding fixes.
Explains compatibility with HR/Bravo valves and O-ring usage.
Describes an optional kit for specific NRS valve types.
Guidelines for cleaning, cooling, and storing the pump.
Details warranty coverage, transferability, and seller obligations.
Specifies warranty duration for different components and use cases.
Outlines shipping responsibilities for warranty claims and returns.
