Sears Craftsman 319.226560 User Manual

®
Save This Manual For Future Reference
OW °
MANUAL
Model No.
319.226560
Serial No.
Model and serial
numbers may be
found on the nam
plate located on the
front of the tool. You
should record both
the model and serial
number and retain it
in a safe place for
future use.
Caution:
Read, understand and
follow ALL Instruc-
tions and rules for
safe operation before
operating this tool.
LT/
SANDER
C
•Warranty
. Safety Instructions
" KnowYour Belt/Disc Sander
• Operation and Maintenance
• Repair Parts
226560102
226560102
Sears, Roebuck and Co., Hoffman Estates, lL 60179 U.S.A.
NRTL/C
LR 78936

Sears Craftsman 319.226560 Specifications

General

Brand	Sears
Model	Craftsman 319.226560
Category	Sander
Language	English

Summary

Warranty Information

Safety Instructions

Before Using the Sander

Lists preliminary safety checks and precautions before operating the sander.

Additional Safety Instructions

Provides further safety guidelines for operating the belt/disc sander.

Extension Cord Guidelines

Provides recommendations for selecting and using extension cords with the sander.

Grounding Instructions

Explains the importance and procedure for grounding the sander for safety.

Belt/Disc Sander Specifications

Unpacking and Checking Contents

Unpacking Procedure

Step-by-step guide for unpacking the belt/disc sander from its carton.

Parts List

A detailed list of all components included with the belt/disc sander.

Know Your Belt/Disc Sander

Assembly Instructions

Installing the Sanding Disc

Instructions for attaching the sanding disc to the sander's plate.

Installing the Sanding Belt

Steps for properly fitting and tensioning the sanding belt onto the drums.

Mounting the Disc Sander Table

Guide for attaching and adjusting the disc sander table to the sander.

Mounting the Backstop

Instructions for attaching the backstop to the sander for stability.

Mounting the Belt Sander Table

Steps for mounting the table used for belt sanding operations.

Installing the Dust Deflector

Guide for attaching the dust deflector to the sander's dust collection system.

Fastening Sander to Work Surface

Instructions on how to securely mount the sander to a workbench or surface.

Operation and Adjustments

ON/OFF Switch Operation

How to use the keyed switch to turn the sander on and off safely.

Sanding Belt Tracking Adjustment

Procedure for adjusting the sanding belt to ensure it runs correctly.

Changing Belt Bed Position

Instructions for adjusting the sanding belt bed to different angles.

Attaching Disc Table for Vertical Sanding

Steps for attaching the disc table to the sander for vertical belt sanding.

Squaring the Tables

Ensuring work tables are correctly aligned (90°) with sanding surfaces.

Squaring the Backstop

Aligning the backstop square to the sanding belt for horizontal sanding.

Basic Sanding Operations

Using the Sanding Belt

Guidance on performing sanding operations using the belt feature.

Surface or Edge Sanding on Belt

Techniques for sanding surfaces or edges on the sanding belt.

End Sanding on the Belt

How to perform end sanding operations using the belt.

Sanding Inside Curves

Method for sanding the inner curves of workpieces on the sanding belt.

Edge Sanding of Long Workpieces

Technique for edge sanding longer pieces of material on the belt.

Using the Disc Sander

Guidance on performing sanding operations using the disc feature.

End Sanding and Outside Curve Sanding with Disc

Techniques for sanding ends and outside curves using the disc.

Maintenance

Lubrication

Information on lubricating the sander's bearings and moving parts.

Drive Belt Adjustment

Steps for adjusting the tension and alignment of the sander's drive belt.

Service and Parts