Need help?Do you have a question about the Sears Hillary 308.711090 and is the answer not in the manual?
Spread tent flat, floor side down, and unzip doors before assembly.
Extend fiberglass frame poles by connecting sections and identify main, side room, and awning poles.
Slide three longest poles through opposite roof sleeves, aligning them and crossing at the center.
Insert pole ends into corner pins, flex poles into arches, and secure them at the roof.
Insert stakes through corner rings, hammer at 45° angle to secure the main room tightly.
Slide side room poles through sleeves, attach steel uprights, and insert fiberglass poles into uprights.
Insert stakes through webbing loops on side rooms and hammer at 45° angle to ensure tightness.
Place rainfly over tent, align awning, attach hooks to rings, and secure velcro tabs to poles.
Tie guy ropes to fly loops above doors, create loops with sliders, and attach to stakes for tension.
Insert remaining poles into awning pockets and secure ends to grommeted holes above the front door.
To Next Page
General
