SeaSTAR POWER PURGE JR HA5445 User Manual

www.seastarsolutions.com
®
SEASTAR POWER PURGE JR
APPLICATIONS
Bleeding tool for all SeaStar
and BayStar steering systems.
FEATURES
• Makes bleeding systems
simple, ensuring steering feel
is solid every time
• 100% portable
• Powered by 12v battery
• Fast and efcient set up
• Quick connect ttings
• Easy to operate
• Filter screens help keep
contamination out of your
steering system
• Complete Fill & Purge in 10
minutes or less
• Optional Dual Cylinder
Purging Kit HA5461 available
The EASY way to 100% purge air out of BayStar and SeaStar hydraulic steering systems.
The Power Purge Jr. reduces installation and warranty costs while enhancing the quality of the
boat to the end user. A typical manual ll and purge takes the average experienced installer
or service technician about 30 minutes per boat - by using the Power Purge Jr. this can be
reduced to 10 minutes or less.
Issue Date - Aug 2016
Issue Number - pas6
Page 1 / 3
ORDER INFORMATION
COMPONENTS PART No.
Power Purge Jr. HA5445-2
50 ft Hose Extension Kit HA5462
Dual Cylinder Purging Kit HA5461
SPARE PARTS
Motor Replacement Kit HP6116
Helm Adapter Kit HP6148
Quick Connect Hose Ends HP6170
Hose/Quick Connect Replacement Kit HP6171
Low Prole Hose Fitting Kit HP6149
Power Purge Service Kit HP6125

SeaSTAR POWER PURGE JR HA5445 Specifications

General

Part Number	HA5445
Description	SeaSTAR POWER PURGE JR
Category	Auto-Purgers
Manufacturer	SeaSTAR
Voltage	12V DC
Power Supply	Electric
Operating Temperature	32°F - 122°F (0°C - 50°C)

Summary

Seastar Power Purge Jr. Applications and Features

Product Applications

Designed as a bleeding tool for all SeaStar and BayStar hydraulic steering systems.

Key Product Features

Highlights portability, 12v power, quick connect fittings, ease of use, filter screens, and fast operation.

Order Information and Components

Lists available components and spare parts for the Power Purge Jr. kit, including part numbers.

Power Purging Instructions

Single Cylinder Power Purge Operation

Step 1: Connect hoses, bleeders, and battery. Step 2: Purge by turning unit on, filling helm, cycling wheel, and tightening bleeders.

Disconnection and Testing Procedures

Step 3: Disconnect hoses, battery, and test cylinder movement. Perform system proof test by exceeding normal stop pressure.