IF AND WHEN ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
3.71
TIPS AND MAINTENANCE
•
Pull plug
A
off.
•
Unhook spring clip
B
and fold it down.
•
Remove defective bulb
1
and insert
new bulb so that the locating lugs on the
bulb plate engage in the recess in the
reflector.
•
Fold spring clip over the bulb plate and
press forwards until the clip engages.
•
Connect plug.
•
After changing the bulb, replace the
cap with the two lugs down and slide it
forwards until the spring catch engages.
•
After renewing a main beam headlight
bulb have setting checked.
Side light bulb
•
Open bonnet.
•
Remove headlight cap – see “Main
headlight bulb”.
•
Pull bulb holder
2
out of the reflector.
•
Pull out defective glass based bulb and
insert new bulb.
•
Insert holder in reflector.
•
After changing bulb, replace the cap
with the two lugs down and slide it for-
wards until the spring catch engages.
Front fog lights*
Bulbs should be changed by a Technical
Service Centre.
IN0-058