Seat Inca 2020 - Page 89

CLIMATE CONTROL ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 2.55
HANDLING INSTRUCTIONS
Heating interior quickly
•
Rotary switch
A
to speed 3.
•
Rotary regulator
B
fully to right.
•
Rotary regulator
C
at ...................
•
Vents 3 closed.
•
Vents 4 fully or partially opened with
knurled discs as required.
Heating interior comfortably
When the windows are clear and the
desired temperature has been reached
the following settings are recommended:
•
Rotary switch
A
at position 1 or 2.
•
Rotary regulator
B
at the desired heat
output.
•
Rotary regulator
C
, depending the
desired air distribution, between and
.
If the windscreen mists up again, the
rotary regulator can be turned to a posi-
tion between and .
•
Vents 3 closed.
•
With vents 4 the desired amount of
warm air and the air flow direction can be
set.
Ventilation (fresh air operation)
With the following settings, unheated
fresh air flows from vents 3 and 4:
•
Rotary switch
A
to desired position.
•
Rotary regulator
B
anti-clockwise to the
stop.
•
Rotary regulator
C
at ...................
•
Vents 3 and 4 open.
If required, regulator
C
can be turned to
another position.
Maximum cooling*
•
Close all side windows.
•
Control
A
, to position 4.
•
Control
B
, to the left.
•
Control
C
, to ................................
•
Press button
D
..............................
AC
•
Press the right button
D
..............
•
Vents 3 and 4 open (towards the ceil-
ing).
At least one vent must always be
open, otherwise the air conditioning
system may freeze.