Operating modes
●
The v
olume of the tr
affic announcements
can be changed with the v
olume control .
This setting will also apply for subsequent an-
nouncements.
●
A pop-up message appears that allows
you to cancel the traffic announcement
(Cancel) or deactivate the TP function (De-
activate).
Changing frequency band
The frequency band selected (FM, AM
1)
or
D
AB
1)
) is sho
wn on the t
op left.
●
In Radio mode, press the
equipment
butt
on briefly t
o displ
ay the FM
, AM
1)
and
D
AB
1)
function butt
ons
›
›
›
Fig. 110.
●
Press one of the function buttons FM
, AM
or D
AB
to change the frequency band.
●
OR: Pr
ess the
equipment button a few
times t
o cycl
e thr
ough the different lower
function buttons.
Changing station
Fig. 113 Go to the next available station with
the arrow butt
ons.
Fig. 114 Changing the stations with the arrow
butt
ons is only possibl
e f
or saved stations.
●
Press the or arrow button on the sys-
t
em or the displ
ay.
Based on the mode sel
ected for the search
mode (Arrow buttons:) you can cycle
through either available or saved stations.
Manually tuning a station frequency
●
To select the desired frequency band
›››
page 115.
●
Press the function button of the frequency
band .
●
Rotate the setting button until the desired
frequency is shown on the display
(e.g. 89.9 MHz).
●
OR: Press one of the double-arrow buttons
›››
Fig. 116 until the frequency is shown on the
screen.
1)
This depends on the country and unit in ques-
tion.
117
To Next Page
Loading...
