2.46
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– LIGHTS AND VISIBILITY
HANDLING INSTRUCTIONS
2 –– IInstrument llighting
When the lights are on, the level of the
instrument lighting can be set to any
intensity by turning the knurled wheel
next to the light switch.
3 –– HHeadlight rrange ccontrol*
With the electric adjustment of the head-
lamp range, headlights can be matched
exactly to the load condition of vehicle.
This prevents oncoming traffic from being
dazzled more than is unavoidable. At the
same time the correct headlight beam
adjustment provides the best possible
visibility for the driver.
The headlights can only be regulated with
the dipped headlights switched on.
To lower the beams, turn knurled disc
from the basic position (0) downwards.
4 –– HHeated rrear wwindow
The heating works only when ignition is
on. When heater is on a lamp in the switch
lights up.
❀
As ssoon aas wwindow iis cclear,
switch eelement ooff. TThe rreduced
current cconsumption hhelps tto rreduce
fuel cconsumption –– ssee ppage 33.19.
On vehicles with electrically adjustable
exterior mirrors the mirrors are heated as
long as the rear window heating is
switched on.
TO8-014A TO8-015
To Next Page
Loading...
