Seav BeSUN 433 - User Manual

BeSUN Electronic Control Unit

Summary

Product Installation Guide

User Safety and Usage Instructions

Installer Technical Notes

Remote Control Operation Modes

1-Button Radio Control Operation

Step-by-step operation using a single-button radio control for up/stop/down.

2-Button Radio Control Operation

Upward and downward movement control using a two-button radio control.

3-Button Radio Control Operation (BeFree x1)

Up, stop, and down commands using a three-button BeFree x1 radio control.

3-Button Radio Control Operation (BeFree x3)

BeFree x3 control with sun sensor enablement via +/- buttons.

3-Button Radio Control Operation (BeFree x6)

BeFree x6 control for selecting UP-STOP-DOWN for 6 different uses.

Sun Sensor Functionality

Sun Sensitivity Adjustment

Adjusts Sun Sensor sensitivity using VR1 trimmer for light conditions.

Programming Keys and Indicators

Main Menu Programming Options

Program 1- or 2-Button Radio Control

Procedure to program transmission codes using a 1- or 2-button radio control.

Program BeFree xx Series Radio Controls

Method to program BeFree xx series radio controls by UP key.

Delete Stored Radio Control Codes

Procedure to delete all transmission codes stored in the unit's memory.

Program Motor Operating Time

Sets motor operating time, with options for fixed time or unlimited.

Extended Menu Configuration

Activate Extended Menu

Enables extended menu functions using the SET key for 5 seconds.

Enable Remote Radio Control Programming

Allows remote programming of transmission codes via radio control.

Enable Automatic Movement Lock

Prevents automatic movements after a stop command until a new command.

Reset Unit to Default Settings

Restores default configuration by pressing SEL and SET keys simultaneously.

Seav BeSUN 433 Specifications

General

Brand	Seav
Model	BeSUN 433
Category	Control Unit
Language	English