Seaward TEST n TAG PRO BT User Manual

4. SPECIFICATION
Print Mode:
Thermal Line Dot Print (8 dots/mm)
Fujitsu Printer Mechanism
Interface Options: 55mm capacity
RS-232 (6 Way RJ12) + Bluetooth
TM
TEST n TAG PRO
Interface Details:
RS-232 Rx, Tx, Busy, Ground, Wake-up control, Optional Trickle Charger Input
Selectable baud rates and formats (Default: 9600,N,8,1)
Bluetooth Bluetooth v2.1, Class 2 (up to 10m range)
Profiles: iAP, LM, L2CAP, RFCOMM, SDP, TCS, SPP (Serial Port Profile)
Battery Pack:
5 Cell NiMH Battery Pack (up to 1.8Ah capacity)
Charger:
Universal Input Trickle Charger (UK/Euro/USA/Aus)
Input: 100 - 240V ~ 50/60Hz
Print Speed:
50 mm/s Typical with a fully charged battery
Thermal Label:
Roll Width = 57
+0
/
-1
mm
55mm Max Outer Diameter
Alignment hole 4x4mm cut-out, 2mm from the edge of the backing paper
Outer Dimensions: TEST n TAG PRO
Height (mm) 65
Width (mm) 95
Depth (mm) 128
Weight (g) (including Label Roll and Battery Pack) 434
NOTE: There are no user changeable options on this printer. It comes pre-configured to
work with Seaward test instruments. For help connecting the printer to your tester please
see the support pages on the Seaward website:
www.seaward.co.uk/faqs
WARNING:
Only use approved
Battery Packs and Chargers
Revision: 2.3
Filename: 339A580
Date: 09/08/2016
TEST n TAG PRO BT Thermal Mini Printer
Quick Start Guide
1. INFORMATION
“TEST n TAG PRO BT” Product Kit includes:
• 1 x TEST n TAG PRO Printer (including battery pack)
• 1 x Universal Input Trickle Charger (UK/Euro/USA/Australia)
• 1 x Quick Start Guide
• 1 x Belt clip / Wall mounting bracket
• 1 x Primary Cell cradle
• 1 x Label roll
Full Product Code Information:
Product Code Description
339A980 - BT Thermal Mini Printer (supplied with 52 x 74mm labels)
339A987 - BT Thermal Mini Printer (supplied with 52 x 25mm labels)
339A946 - 52 x 74mm TNT Pro Label Roll (Approx. 130 labels)
339A947 - 52 x 25mm TNT Pro Label Roll (Approx. 350 labels)
339A915 - Replacement / Spare Battery Pack
339A966 - Primary Cell Cradle
Optional Accessories
339A954 - Car Charger
Seaward Group
Bracken Hill
South West Ind. Estate
Peterlee
County Durham
SR8 2SW
England
T: +44 (0) 191 586 511
F: +44 (0) 191 586 227
www.seaward.co.uk

Seaward TEST n TAG PRO BT Specifications

General

Brand	Seaward
Model	TEST n TAG PRO BT
Category	Printer
Language	English

Summary

Printer Specifications

Print Mode and Mechanism

Details the thermal line dot print mode and the Fujitsu printer mechanism.

Interface Options and Details

Lists available interface options (RS-232, Bluetooth) and their specific connection details.

Battery and Charger Information

Specifies the 5 Cell NiMH battery pack capacity and universal trickle charger details.

Printing Performance and Labeling

Covers print speed, thermal label roll width, and outer diameter specifications.

Physical Dimensions and Weight

Details the outer dimensions (height, width, depth) and weight of the printer.

Test n Tag Pro BT Printer Kit

Product Kit Contents

Outlines the items included in the TEST n TAG PRO BT product kit.

Product Code and Label Information

Lists product codes for printers and corresponding label roll descriptions.

Available Optional Accessories

Lists optional accessories for the printer, such as car chargers and spare battery packs.