Code calculator user instructions
Activate the code calculator pressing the button with the triangle on it.
After entering your PIN, APPLI appears on the screen.
To enter the internet bank, press 1.
Now the code calculator shows a code, which must be entered in internet bank.
The code is displayed on the screen for 90 seconds, after which the code calculator
will switch off. If you would like to switch off the code calculator earlier, press the
button with the triangle on it twice.
To confirm a payment in the internet bank, press 2.
When confirming a payment or contract, internet bank will
show an access code, which must be entered into the code
After entering the access code, the confirmation code
of transaction appears on the screen of code calculator,
which must be entered in internet bank
Starting to use code calculator
Activating code calculator
To activate the code calculator, press the button with the triangle on it.
If when you turn on the code calculator you see the PIN enter 11111.
If when you turn on the code calculator you see the NEW PIN, continue to the next step.
The image to the right will be displayed on the screen. Enter the code.
If the entered code is too simple (e.g. 11111, 12345, 99999), a message “not SAFE” will be
displayed on the screen and you will have to start code generation once more.
The image to the right will be displayed on the screen.
Re-enter the new code. If the entered codes match, you will see on the screen
“NEW PIN CONF”. Use your new code next time when activating the code calculator.
If the entered codes do not match, a message “FAIL” is displayed and
you will have to start again.
After changing the code, APPLI appears on the screen.
Sample
SampleSample
SampleSample
To Next Page
Need help?
General
