To Next PageTo Next Page
Need help?Do you have a question about the sebaKMT HL 7000 and is the answer not in the manual?
General| Power Supply | 9 V battery |
|---|---|
| Protection Rating | IP 40 |
| Frequency Range | 50 Hz |
| Detection Range | 0.1 mA to 1000 A |
| Operating Frequency | 50/60 Hz |
| Operating Temperature | +50°C |
Provides general safety guidelines and warnings for safe operation of the device.
Contains basic instructions for commissioning and operation of the device/system.
Details the technical specifications for the HL 7000 system and its components.
Lists the parts included in the basic set and optional accessories.
Describes the function, structure, and communication of the HL 7000 system.
Details the function, structure, operating elements, and operation of the HLE 7000 unit.
Describes the CS-7 pole's function, structure, and Bluetooth communication with HLE 7000.
Introduces the headphones and provides instructions for switching on/off and pairing.
Provides safety instructions and describes the design and compartments of the transport case.
Instructions for connecting the transport case to public mains or vehicle electrical systems.
Explains use of carrying strap and mounting the HLE 7000 unit onto the CS-7 carrying pole.
Guide to attaching sensors to CS-7 pole and connecting wired microphones to HLE 7000.
Steps to power on the HLE 7000, CS-7, and headphones and check their status.
Essential pre-operation checks for mute button functionality and system time configuration.
Instructions for performing noise level measurements, including procedure and display.
Guide to conducting long-term measurements and displaying noise level history.
Details the steps for performing pinpoint location measurements, including search variants.
Outlines the steps for pipe location, including 10-point and free search methods.
Details the steps for performing tracer gas detection using the H2 sensor.
Allows changing the language of the user interface.
Configuration of internal time, date, time zone, and daylight saving time.
Sets what happens when the mute button is pressed (start/stop measurement).
Sets headphone volume limits to protect user hearing from sudden swings.
Adjusts screen information displayed during measurements for specific methods.
Manages pairing of headphones and microphones with the HLE 7000.
Configures screen auto-off and device auto-shutdown times.
Sets the action performed by the quick-selection button when briefly pressed.
Displays firmware version, hardware version, serial number, and other device details.
Resets all device configurations to factory default settings.
Describes the main components of the HydroluxView software interface.
Explains how to create, rename, and delete directories and measurements in the archive.
Step-by-step guide to connect the HLE 7000 to a computer via USB for data transfer.
Procedure to import measured data from the HLE 7000 into the HydroluxView software.
How to access, view, and edit saved measurements on the HLE 7000.
Procedure to remove a saved measurement and its associated data from the HLE 7000.
How to find out the current firmware version of the HLE 7000 and CS-7.
Lists the necessary requirements for performing a firmware update.
Step-by-step instructions for updating the firmware on the HLE 7000 and CS-7.
