Need help?Do you have a question about the Seben MD-3009 and is the answer not in the manual?
General| Type | VLF (Very Low Frequency) |
|---|---|
| Power Supply | 9V Battery |
| Audio Output | Built-in speaker and headphone jack |
| Adjustable Stem | Yes |
| Discrimination | Yes |
| Sensitivity Adjustment | Yes |
| Operating Modes | All Metal, Discrimination |
| Audio Indicator | Yes |
| Visual Indicator | LED display |
| Detection Depth | Up to 1.5 meters (depending on soil conditions and target size) |
Details the features of the MD-3009 metal detector, including its automatic operation and targeting functions.
Provides essential rules for responsible metal detecting, emphasizing permission, site care, and legal compliance.
Lists approved locations for metal detecting, such as parks, lakes, and federal lands.
Step-by-step guide on how to assemble the metal detector, including stem and coil connections.
Instructions on how to correctly insert and check the 9-volt batteries for the detector.
Explains how to test the detector's batteries to ensure they are functioning correctly.
Details the benefits of using headphones and how to connect them to the detector for better audio.
Covers both Zero Motion and Motion Search targeting modes for precise object location.
Advice on optimizing detector use, including sweep techniques, overlap, and using headphones.
Describes the two primary modes: Searching (VLF-Motion Discrimination) and Targeting.
Details how to use the searching mode, including initial settings and general rules for effective sweeping.
Identifies common causes of false signals and provides solutions for interference and mineralized ground.
To Next Page
