Need help?Do you have a question about the Seck 1882 and is the answer not in the manual?
General| Brand | Seck |
|---|---|
| Model | 1882 |
| Category | Music Equipment |
| Language | English |
SECK consoles offer state-of-the-art design, cost-effectiveness, and comprehensive in-line monitoring.
Highlights custom aluminium extrusions, injection moulded controls, and user-friendly design features.
Details Mic, Line, Tape inputs, Insertion points, EQ, Monitor, and Aux sends on each channel.
Covers Master/Group mixing, Track outputs, Aux/Foldback sends, and monitoring options.
Guidelines on protecting the console from moisture, heat, and dirt.
Details the external power supply, IEC inlet, locking DC plug, and fuse specifications.
Explains correct wiring polarity and options for mobile and battery operation.
Describes MIC, LINE, TAPE, INSERT sockets, MIC/LINE switch, and GAIN control.
Details MONITOR, EQ (HF, MID, LF), FB, AUX, PAN, and group routing controls.
Explains the break-point in the signal path for inserting external equipment.
Details the HF, LF, and MID frequency controls with sweepable mid-range.
Explains EQ frequency interaction and details balanced vs. unbalanced cable types.
Diagrams and descriptions for 3-pole stereo and 2-pole mono jack wiring.
Covers Group/Track outputs, Talkback, Meters, Aux Sends, and Monitor Echo controls.
Details Aux Return socket, EQ, Level, PAN, and routing switches.
Details Monitor Echo, Main Monitor Outputs, and Headphone controls.
Highlights console suitability and provides a recording setup diagram.
Guide to setting input levels, gain, monitor levels, and routing channels to groups.
Instructions for assigning groups to track outputs and final setup checks.
Table providing initial settings for Input, Output, Monitor, Aux, and Talkback controls.
Steps for setting controls for playback and adjusting monitor levels.
Guide to routing channels, adjusting levels using faders, and controlling master output.
Table providing initial settings for Input, Monitor, Group, Aux, and Headphone controls for playback.
Explains overdubbing and guides setting console controls, tape machine sync, and foldback mix.
Instructions for adjusting monitor levels, channel levels, and switching for recording.
Table providing initial settings for Input, Monitor, Group, Aux, and Headphone controls for overdubbing.
Details Aux Send/Return, Headphone Volume, and Monitor Echo controls.
Explains Main Monitor Outputs, Foldback controls, and DIM switch.
Diagram illustrating a live P.A. system setup.
Guide to setting input levels, gain, and checking P.A. amplifier gains.
Instructions for routing channels/sub-mixes and monitoring via headphones.
Details on constructing foldback mixes and adjusting foldback output levels.
Table providing initial settings for Input, Monitor, Talkback, Aux, and Headphone controls for Live P.A.
Explains routing signals to Aux Sends for effects and returning via Aux Returns.
Describes using Monitor Echo for chorus/reverb in foldback for better vocal performance.
Explains FB1/FB2 controls for two foldback mixes and their derivation.
Tips on microphone placement for optimal sound and reduced EQ reliance.
Highlights AUX RETURN inputs, GROUP INSERT outputs, and flexible recording formats.
Discusses insert point usage and using outputs for Public Address systems.
General advice on cable inspection, ground-loops, and safety grounding.
Guidance on fault finding, contacting dealers, and warranty claim procedures.
Details frequency response, noise ratio, distortion, CMRR, crosstalk, and output levels.
Lists equalizer, fader, headphone, meter, power, and dimension specifications.
To Next Page