SECO-LARM Enforcer SD-927PKC-NEQ User Manual

Wave-to-Open Sensors
Installation Manual
SD-927PKC-NEVQ SD-927PKC-NEQ
5024193
Conforms to
UL294
Model
Size
Operating Voltage
Override Button
SD
-
927PKC
-
NEQ
Single
-
gang
12~24 VAC/VDC
No
SD
-
927PKC
-
NEVQ
Single
-
gang
12~24 VAC/VDC
Yes
*Spanish and French faceplates also available.
The ENFORCER Wave-To-Open Sensors use IR technology to request egress from a protected
area or activate a device with the simple wave of a hand. Since no touch is required, they are
suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination),
schools, factories, or offices. The SD-927PKC-NEVQ adds a manual override button as a backup
to the sensor. Also available with Spanish (SD-927PKC-NSQ, SD-927PKC-NSVQ) or French
(SD-927PKC-NFQ, SD-927PKC-NFVQ) faceplates.
 Operating voltage, 12~24 VAC/VDC
 Range adjustable from 2
3
/
8
"~8" (6~20 cm)
 Stainless steel single-gang plate
 3A relay, adjustable from 0.5~30 sec, toggle, or as long as hand is near the sensor
 LED illuminated sensor area for easy identification
 Selectable LED colors (turns from red to green or green to red) when activated
 Quick connect screw-less terminal block
 Power must be provided by low-voltage power-limited/Class 2 power supply
 Use only low-voltage field wiring and do not exceed 98.5ft (30m)

SECO-LARM Enforcer SD-927PKC-NEQ Specifications

General

Brand	SECO-LARM
Model	Enforcer SD-927PKC-NEQ
Category	Accessories
Language	English