Need help?Do you have a question about the SECO-LARM SLI ENFORCER SK-1131-SPQ and is the answer not in the manual?
Basic steps for installing the keypad for installers.
Visual guide illustrating how to mount the keypad to a back box.
Essential wiring connections for basic setup and operation.
Detailed instructions for physically installing the keypad on a wall.
Comprehensive terminal connections and wire functions for proper setup.
Key capabilities and functionalities of the access control keypad.
Detailed technical data including voltage, current, dimensions, and environment.
General product description and a list of included components.
Explanation of LED status lights and audible feedback signals.
Understanding keypad codes, cards, and security levels for programming.
How to use programming functions and their default settings.
Procedure to reset programming values to factory defaults.
Setting or changing the master code for programming access.
Programming the super user code for advanced control functions.
Setting common codes for multiple users or cards.
Programming individual user codes and proximity cards for access.
Setting temporary visitor codes with specific durations or single use.
Assigning duress codes for silent alarms during forced entry.
Configuring output relays for toggle or timed activation.
Setting the clock and programming daily auto-disable periods for output #1.
Configuring lock-up after failed attempts and user code entry methods.
Customizing audible feedback for keypad operations and relay activations.
Configuring center LED standby behavior and door-forced-open warnings.
Programming egress button behavior with delays, warnings, or alarms.
Method to enter programming mode if the master code is forgotten.
Guide on how to open doors using different security levels.
Regulatory compliance information and product warranty details.
To Next Page
General
