Seco SECOMX-945/N270 - Default Chapter; Revision History

SECOMX-945/N270
User Manual - Rev. First Edition: 0.1 - Last Edition: 2.1 - Author: S.B. - Reviewed by G.M.
Copyright © 2011 SECO s.r.l.
SECOMX-945/N270
pag. 2
REVISION HISTORY
Revision
Date
Note
Rif.
0.1
15/06/2009
First release preliminary
SB
1.0
25/06/2010
First official release
SB
1.1
27/12/2010
BIOS Section updated
“I/O mapping – IRQ” chapter added
SB
1.2
14/03/2011
BIOS Section updated
SB
1.3
29/06/2011
BIOS Section updated
SB
2.0
22/07/2011
New release related to board version with Realtek Ethernet controller
SB
2.1
26/09/2011
Technical features updated
Optional signals paragraph updated (par. 3.2.2.5)
IDEx Master and Slave identification added (par. 4.3.16)
Internal IDE/SATA mode paragraph updated (par. 4.4.14)
SB
All rights reserved. All information contained in this manual is confidential material and
property of SECO S.r.l.
Unauthorised use, duplication, modification or disclosure of the information to a third-party by any
means without prior consent of SECO S.r.l. is prohibited.
Every effort has been made to ensure the accuracy of this manual; however, SECO S.r.l. accepts
no responsibility for any inaccuracies, errors or omissions herein. SECO S.r.l. reserves the right to
change specifications without prior notice in order to supply the best product possible.
For more information on this and other SECO products, please visit our web-site at:
http://www.seco.com
For assistance and problem solving please contact via email hardware@seco.com for hardware
related issues or software@seco.com for software related issues, specifying the product model
and describing the current problem.
SECO Srl - Via Calamandrei 91
52100 Arezzo – ITALY
Ph: +39 0575 26979 - Fax: +39 0575 350210
http://www.seco.com