Second Story Home Ollie User Manual

B O X C O N T E N T S
A.0 H E A D BORD x 1
B.0 F OOTBOARD x 1
C.0 S I DE PAN EL x 2
LEG S x 4D.0
E.0 MIDDLE LEG x2
F.0 HEADBOARD BRACKET x 2
G.0 FOOTBOARD BRACKET x2
SUPPORT BRACKET x6
H .
BOTTOM PANELS X2
J.
0
ALLEN BOLT 1” x28
I.
0
WOODEN STABILIZER x3
K.
0
ALLEN BOLT 2.25” x8
L.
0
ALLEN WRENCH x1
M.
0
B. QTY1
I. QTY2
F. QTY2
G. QTY2
D. QTY4
C. QTY2
A. QTY1
H. QTY6
K. QTY28
L. QTY8
M . QTY1
J. QTY3
E. QTY2

Second Story Home Ollie Specifications

General

Brand	Second Story Home
Model	Ollie
Category	Indoor Furnishing
Language	English

Summary

Assembly Steps

Step 1: Install Brackets on Side Panel

Install headboard and footboard brackets on side panels. Repeat for the other panel.

Step 2: Install Support Brackets

Install all 6 support brackets on both side panels using washers and screws. Do not tighten initially.

Step 3: Attach Footboard

Attach the footboard to the footboard brackets using two small bolts. Repeat as needed.

Step 4: Attach Headboard

Attach the headboard to the headboard brackets using four 1" Allen bolts. Repeat on the other side.

Step 5: Attach Legs and Middle Legs

Flip bed, screw legs into headboard and footboard using 1" bolts. Screw in middle legs. Flip bed back.

Step 7A: Install Wooden Stabilizers

Install the three wooden stabilizers into the support brackets.

Step 7B: Place Bottom Panels

Place both bottom panels down onto the installed supports.

Product Care and Warranty Information

Care and Maintenance

Periodically check bolts and screws. Tighten as needed. Spot clean only, avoid excess moisture.

One Year Limited Warranty

Details on warranty coverage for defective or missing parts, exclusions, and state-specific rights.

Contact Us

Information on how to find product details, register, or request replacement parts via website or email.