The Bodhi Toddler Bed is a children's bed designed for toddlers, featuring a simple and sturdy construction. The manual provides detailed instructions for assembly, a list of included parts, and important information regarding care, maintenance, and warranty.
Function Description:
The Bodhi Toddler Bed serves as a safe and comfortable sleeping solution for toddlers transitioning from a crib. Its design focuses on stability and ease of assembly, ensuring a secure environment for the child. The bed is constructed from various panels and brackets, supported by wooden dowels and legs, and features a slatted base for mattress support.
Important Technical Specifications (Derived from parts list):
- Components:
- Side Panels (A): 2 units
- End Panels (B): 2 units
- Support Brackets (C): 6 units
- Allen Wrench (D): 1 unit (for assembly)
- Left Brackets (E): 2 units
- Right Brackets (F): 2 units
- Bolts (G): 28 units (for securing components)
- Bottom Panels (H): 2 units (for mattress support)
- Support Bars (I): 3 units (to hold bottom panels)
- Wooden Dowels (J): 4 units (for aligning end panels)
- Legs (K): 4 units (for bed elevation)
- Materials (Implied): Wood (for panels, dowels, legs), Metal (for brackets, bolts, allen wrench).
- Dimensions (Implied): Standard toddler bed size, accommodating a toddler mattress. The specific dimensions are not provided in the manual but can be inferred from the "Bottom Panels (H)" and "Support Bars (I)" which indicate a standard mattress support system.
Usage Features:
- Assembly Process: The manual outlines a clear, step-by-step assembly process, broken down into seven distinct steps.
- Step 01: Attaching Side Brackets: Left and Right Brackets (E&F) are attached to the Side Panels (A) using Bolts (G) and the Allen Wrench (D). It's crucial to tighten these halfway initially and then fully once all four brackets are in place.
- Step 02: Installing Support Brackets: Bolts (G) are inserted into the left, center, and right sides of the Side Panels (A) and screwed in halfway. Once the Support Brackets (C) are in place, the bolts can be fully tightened. The manual emphasizes not to overtighten. This step is repeated for both side panels.
- Step 03: Preparing End Panels: Wooden Dowels (J) are inserted into both End Panels (B). Four Bolts (G) are then screwed into each End Panel (B) using the Allen Wrench (D), again, not all the way initially.
- Step 04: Attaching End Panels: The End Panels (B) are attached to the Side Brackets (E). This involves placing Bolts (G) into larger holes and sliding the End Panel (B) upwards. A critical alignment step is to ensure the wooden dowel aligns with the dowel hole on the Side Panel (A) before tightening all bolts with the Allen Wrench (D). The instruction explicitly states not to overtighten.
- Step 05: Attaching Legs: The Legs (K) are attached to the bottom of the Left and Right brackets. The manual suggests flipping the bed onto its side for easier installation.
- Step 06: Placing Support Bars: The Support Bars (I) are placed into the Support Brackets (C), forming the base for the mattress.
- Step 07: Installing Bottom Panels: The Bottom Panels (H) are placed over the support bars. Before placing the mattress, all bolts must be checked to ensure they are securely tightened.
- Safety Emphasis: Throughout the assembly, the manual repeatedly stresses the importance of not overtightening bolts and to check all bolts for security before use and before placing the mattress. This highlights a strong focus on user safety and product stability.
Maintenance Features:
- Regular Checks: Users are advised to periodically check the bed for any loose bolts and screws and to tighten them as needed.
- Damage Protocol: If the bed is damaged, it should not be used. Users are instructed to contact the manufacturer for replacement parts.
- Cleaning: The bed should be spot cleaned only, and excessive moisture should be avoided.
- One-Year Limited Warranty: The product comes with a one-year limited warranty from the date of original purchase.
- Defective Parts: Defective parts will be replaced within the one-year period.
- Missing Parts: Missing parts will be replaced within 30 days from the day of original purchase.
- Original Packaging: The warranty applies only to new units purchased in their original packaging.
- Non-Transferable: The warranty does not cover used, second-hand, or demo units and is non-transferable.
- Exclusions: The warranty does not cover damage or defects resulting from normal wear and tear, abuse, negligence, improper use, alteration to the finish, design, hardware, or assembly of the product.
- State-Specific Rights: The specific legal rights under this warranty may vary from state to state, as some states do not allow exclusions or limitations of incidental or consequential damages, or limitations on the duration of an implied warranty.
- Website: www.secondstoryhome.com for product information, registration, contact, or replacement parts requests.
- Email: support@secondstoryhome.com
- Mailing Address: Second Story Home, 1477 Davril Cir, Corona, CA 92878.
To Next Page
Need help?
General
