Need help?Do you have a question about the Secukey SK1-H and is the answer not in the manual?
General| Brand | Secukey |
|---|---|
| Model | SK1-H |
| Category | IP Access Controllers |
| Language | English |
Lists key functionalities and capabilities of the SK1-H access controller.
Details technical parameters including user capacity, voltage, current, and connectivity.
Lists all items included in the product packaging.
Provides step-by-step instructions for mounting the access control unit.
Visual representation of the wiring connections for the access control system.
Diagram illustrating the power supply connections for the access control unit.
Procedure for resetting the device to its original factory settings.
Description of the tamper alarm mechanism using a light dependent resistor.
Explains the meaning of different LED colors and buzzer sounds.
Instructions for managing users, including adding, deleting, and changing PINs.
Guidance on using master cards to add or delete user cards.
Configuration options for the relay operation modes.
Settings for door open detection, keypad lockout, and alarm outputs.
Procedure for setting up panic PINs or cards for emergency access.
Configuration for Wiegand data transmission format (26-37 bits).
Using the SK1-H as a slave reader for Wiegand data output.
Using the SK1-H as a controller receiving Wiegand data input.
Diagram showing Wiegand reader and controller connections.
To Next Page