Need help?Do you have a question about the Secura Key RADIO KEY 600 and is the answer not in the manual?
Procedure to enter the programming mode using a 5-digit password, indicated by an amber LED.
Steps to add a transponder by presenting it to the reader for system entry, confirmed by a green light.
Method to add a transponder by manually entering its ID number via keypad, requiring user number and ID.
Instructions for adding multiple transponders sequentially by presenting them, specifying a user number range.
Procedure to assign a 4-digit PIN code to a user number for keypad access.
Steps to remove a single transponder or PIN code using its user number for system management.
Method to remove multiple transponders or PINs by specifying a user number range for efficient clearance.
Procedure to delete a transponder by presenting it to the reader after initiating the void command.
Method to delete a transponder by manually entering its ID number via keypad after initiating the void command.
Procedure to change the default 5-digit password for enhanced security.
Configuration of the latch relay time, controlling door unlocking duration (0.25-30 seconds).
Selection of operational modes: Active, Inactive (Locked), or Door Unlocked.
Guide to making connections from Connector P1 to power supply, locks, and alarm systems.
Instructions for wiring electric locks with a separate power supply and installing the MOV.
Specifications for powering the RK600 unit, including voltage, current, and polarity warnings.
General| Brand | Secura Key |
|---|---|
| Model | RADIO KEY 600 |
| Category | Control Systems |
| Language | English |
To Next Page
