EasyManua.ls Logo

Securam Basic - User Manual

Securam Basic
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Unit 19/80 Mills Rd, Braeside Vic 3195
A
BN 62 123 602 782 www.unitedsafes.com
Phone: 03 9761 1295
E: service@unitedsafes.com
Securam Basic User
Instructions
FEATURES
USER COMBINATION
O
pen Lock
C
hange Combination
WRONG TRY PENALTY
Four (4) consecutive invalid combination
initiates five (5) minute delay period.
LOW BATTERY WARNING
R
epeated LED flashing and beeping during
opening indicates battery is low and needs
immediate replacement.
AUDIO AND VISUAL SIGNAL
D
ouble signal - two (2) LED flashes and two
(2) beeps - indicates entry is valid
or accepted.
Triple signal - three (3) LED flashes and
three (3) beeps - indicates invalid or
not accepted.
OPENING THE LOCK
1. En
ter valid six (6) digit combination (factory set to 1-2-3-4-5-6).
2. The lock will confirm a valid combination entry with a double signal.
3. Within four (4) seconds, turn the handle to the open position.
4. Pull door open.
Invalid Combination Entry - Lock will signal three (3) times.
WRONG
TRY PENALTY
En
try of four (4) consecutive invalid combinations starts a five (5) minute
delay period.
- LED flashes red at ten (10) second intervals.
A
t the end of the delay period, two (2) more consecutive invalid combinations
will restart the additional five (5) minute delay period.
Entry will not respond to keystrokes during delay period.
Question and Answer IconNeed help?

Do you have a question about the Securam Basic and is the answer not in the manual?

Securam Basic Specifications

General IconGeneral
BrandSecuram
ModelBasic
CategoryLocks
LanguageEnglish

Related product manuals