Securam SafeLogic Xtreme

To Next Page

SafeLogic Xtreme Installation and Operation Instructions Doc. No. XU-EC1501A-X151123

SecuRam Systems Inc. Page 1

SafeLogic Xtreme - Electromechanical Redundant Safe Lock System - Instructions

Please visit the website below by scanning the QR code with your smartphone or by typing in the

address below for video instructions on SafeLogic Xtreme Install Instructions.

http://goo.gl/3pZ16W

Important:

1. Do not remove the back cover of the lock case.

2. Modifications of the lock are not recommended and will void product warranty.

3. Use a brand new 9V ALKLINE battery only. Recommend batteries: Energizer

or Duracell

brand.

4. Note that the 4-wire cable connectors have lock-tabs attached to ensure that the cable is

securely connected and locked into place. To prevent damage to this connector, it is required

to pinch the lock-tab when disconnecting the 4-wire cable connector from the socket.

5. Package consists of:

Other manuals for Securam SafeLogic Xtreme

Installation And Operation Instruction14 pages

Need help?

Do you have a question about the Securam SafeLogic Xtreme and is the answer not in the manual?

Summary

Preparing to Install the DialRing and EntryPad

Installing the DialRing

Installing the Lock Body

Installing the Spindle

Checking the DialRing Installation

Installing the Electronic EntryPad

Testing the Lock Installation

Electronic Lock Operating Instructions

Opening the Lock with a Code

Instructions for opening the lock using a user-defined code.

Changing the Default User Code

Procedure for modifying the factory default user code.

Mechanical Lock Operating Instructions

First Spin Dial Combination Opening

Step-by-step guide to opening the lock with the initial mechanical combination.

Changing the Mechanical Combination

Detailed process for setting a new mechanical combination.

Opening with a Mechanical Combination

How to operate the lock using a previously set mechanical combination.

Re-Locking the Safe with Mechanical Combination

Steps to secure the safe after using the mechanical combination.

Resetting the Lock to Factory Default Codes

Warranty Information