Securefast SBL300 - User Manual

Troubleshooting for
Mechanical Digital Locks

Securefast SBL300 Specifications

General

Brand	Securefast
Model	SBL300
Category	Locks
Language	English

Summary

Standard Code Change Mechanical Digital Lock Troubleshooting

Door Will Not Open When Code Entered

Explains why the door won't open after code entry.

New Code Not Working After Change

Addresses issues with newly changed codes not functioning correctly.

Replacement Latch Availability

Collapsed Springs in Inside Handle

Ordering Missing Fixings or Spare Parts

Spindle Not Locating in Inside Unit

Troubleshooting spindle not locating correctly in the inside unit.

Latch Not Returning to Extended Position

Explains why the latch may not return to its fully extended position.

Latch Not Entering Supplied Striker

Describes how the latch interacts with the striker plate.

Easy Code Change Mechanical Digital Lock Operation

Procedure for Changing the Code

Provides instructions on how to change the lock code.

Outside Knob;Lever Operation Without Code

Explains why the outside knob/lever operates without a code.

Model-Specific Easy Code Operations

Changing Handing on SBL330.SL

SBL330.SL Lever Always Operable

SBL330 SL Lever Latch Withdrawal

Changing Handing on SBL365

Assembling Spindle on SBL365

SBL365 Lever Always Operable

SBL365 Latch Withdrawal Failure

Addresses failure of latch withdrawal on SBL365 with correct code.

Easy Code Plus Mechanical Digital Lock (SBL700)

SBL700 Latch Not Withdrawing

Verifying Correct Code Input on SBL700

Assembling Spindle on SBL700.S

SBL700 Programmed Code Not Working

Troubleshooting why a programmed code on SBL700 fails to work.