To Next PageTo Next Page
Need help?Do you have a question about the Security Chimneys International SB36 and is the answer not in the manual?
General| Brand | Security Chimneys International |
|---|---|
| Model | SB36 |
| Category | Indoor Fireplace |
| Language | English |
Details warranty coverage duration and exclusions for parts and labor.
Lists specific components excluded from the warranty.
Covers implied warranties, incidental damages, and specific system issues.
Advises on door operation, firescreen use, and ash disposal for safe fireplace use.
Warns against using gasoline or unvented gas log sets for safety.
Explains creosote, its risks, and how to minimize it through fire management.
Details regular inspection, cleaning frequency, and brush type for chimney upkeep.
Steps to take during a chimney fire, including containment and professional help.
Emphasizes reading instructions, checking codes, and using specified parts for safety.
Lists necessary tools and materials for fireplace installation.
Specifies acceptable floor surfaces and placement guidelines for the fireplace.
Defines required distances from walls to the fireplace opening for safety.
Details insulation, vapor barriers, and clearances for fireplace enclosures.
Guides on framing, combustible material placement, and mantel height.
Specifies materials, dimensions, and securement for hearth extensions.
Explains the need for outside air and installation guidelines for the assembly.
Covers system compatibility, cold climate considerations, and venting requirements.
Details cutting holes, framing, and installing firestops/radiation shields.
Instructions for assembling chimney sections, roof support, and flashing.
Guides on installing elbows, offsets, and supports for angled chimney runs.
Explains the RSI installation for minimizing heat loss at ceilings.
Details the uses and maximum chimney heights for roof support systems.
Describes the offset support for chimneys traversing walls and maximum heights.
Covers installation of angled or insulated radiation shields for wall traversals.
Specifies separation requirements for multiple chimneys in a chase.
Lists part numbers for AC chimney lengths, supports, and firestops.
Lists optional accessories like air kits, blowers, and door sets.
Provides part numbers for SE36, SB36, and SB42 fireplace components.
Illustrates decorative trim placement for SE36 and SR42 models.
Illustrates decorative trim placement for SB36 and SB42 models.
Presents detailed measurements for various fireplace models and components.
