Need help?Do you have a question about the Security Command Executive series and is the answer not in the manual?
Describes Area Arming, All/Perimeter, and Home/Away modes.
Covers bypassing loops, armed messages, and central station reports.
Step-by-step guide to arming specific areas or all authorized areas.
Step-by-step guide to disarm specific areas or all authorized areas.
Step-by-step guide for arming Perimeter only or both Perimeter and Interior.
Step-by-step guide for disarming the All/Perimeter system.
Step-by-step guide for arming Home/Away modes like AWAY, HOME, or SLEEP.
Step-by-step guide for disarming the Home/Away system.
Step-by-step guide to access the system's main User Menu.
Guide to manually turning system relay outputs on or off.
Instructions for bypassing loops before arming or resetting bypassed loops.
Steps to automatically test the system's battery, bell, and communication.
Explains user numbers, code numbers, and authority levels.
Detailed steps for adding new user codes and their permissions.
Detailed steps for deleting existing user codes.
Detailed steps for changing existing user codes and their access.
Step-by-step guide to program automatic arming and disarming times.
Tables for programming and tracking standard user codes, levels, and areas.
General| Backlight | Yes |
|---|---|
| Communication Protocol | RS-485 |
| Power Supply | 12V DC |
| Dimensions | 120mm x 80mm x 20mm |
| Display | LCD |
| Operating Temperature | 50°C |
To Next Page
