Improper care and maintenance can damage your helmet and
could increase your risk of serious injury or death in an accident.
Only clean with mild soap and water or a cleaner designed for motorcycle helmets.
Never use petrochemicals, glass cleaners, ammonia, bleach, gasoline, paint
thinner, benzene, acetone, bug repellant, acid-based, alkali-based or any other
harsh cleaner or solvent. Keep helmet away from fumes of such products. Use
of those or similar products and their fumes can cause damage to the helmets
shell, face shield, interior comfort liner, protective EPS foam and other compo-
nents. This damage may not be visible. Please read the instructions that follow
for more information on how to clean the different helmet components.
Store your helmet in a cool dry place. Keep away from heat in excess of 120º F
and do not set near hot surfaces. Keep away from pets and animals.
Never modify your helmet in any way. This includes, but is not limited to:
• Drilling holes
• Cutting the shell, liner or straps
• Modifying the retention system including adding a chin cup or quick
release mechanism
• Removing parts
• Painting
• Attaching accessories that are not made specifically for the make and
model of helmet
• Cutting or removing rubber trim
• Removal or modifiction of the internal EPS foam
Make sure you can see clearly through the face shield before riding.
7
HELMET CARE AND MAINTENANCE
! !
WARNING
To Next Page
Loading...