9
Exterior (Outer) Shell / Gloss Finish:
Use a cleaner designed for motorcycle helmet shells or use warm water,
non-abrasive hand or dish soap and a clean soft cloth. Use only light pressure to
remove dirt. Thoroughly rinse any cleaning agent and blot dry. Do not use paper
products to clean or dry, as they will scratch it.
Exterior (Outer) Shell / Non-Gloss, Matte Finish:
Use warm water, non-abrasive hand or dish soap and a clean soft cloth. Use
only light pressure to remove dirt. Thoroughly rinse any cleaning agent and blot
dry. Do not use paper products to clean or dry, as they will scratch it. Excessive
pressure, using other cleaning agents, waxes or polish may alter the finish to look
wet or glossy.
Vent Cleaning:
Dirt and debris can find its way into the venting of the helmet. Remove the interior
liner if possible. Use a compressed air can typically used to clean computer
keyboards. Do not use high-pressure air. The compressed air should blow the
dirt and debris out of the vent.
HELMET CLEANING INSTRUCTIONS (cont.)
To Next Page
Loading...