Height of the seat
® Lowering the seat:
1. Sit down on the seat
2. Pull the lever upwards
(the seat will drop slowly)
3. Releasing the lever at the
desired height will lock
the position
® Raising the seat:
1. Stand up
2. Pull the lever upwards
(the seat will rise slowly)
3. Releasing the lever at
the desired height will
lock the position
Height of the lumbar support
® Adjusting the height:
1. Do not lean against the backrest
2. Adjust the handles on both
sides to the desired height
Strength of the backrest pressure
® Increasing the backrest pressure:
1. Pull out the handle
2. Crank the handle clockwise
(forwards)
3. Push the handle back in
® Reducing the backrest pressure:
1. Pull out the handle
2. Crank the handle anticlockwise
(backwards)
3. Push the handle back in
A C
B
D
Angle of the backrest
® Adjusting the
backrest dynamically:
1. Pull the lever upwards
and release it
2. Lean against the backrest
3. The backrest is automatically
released
® Locking the backrest
into position:
1. Lean back until the backrest
reaches the desired angle
2. Press the lever down and
release it to lock the backrest
into position
Seat angle (optional)
® Tilting the seat forward:
1. Stand up
2. Twist the knob under the
seat backwards by 180°,
the seat will tilt forward by 4°
® Levelling the seat:
1. Stand up
2. Twist the knob under the
seat forwards by 180°, the
seat tilts back into the zero
position
E
C
B E
The functions of the swivel chair
8 English
To Next Page
Loading...
