A Height of the seat
® Lowering the seat: 1. Sit down on the seat 2. Pull the lever upwards
(the seat will drop slowly) 3. Releasing the lever at the desired height
will lock the position
® Raising the seat: 1. Stand up 2. Pull the lever upwards (the seat will rise
slowly) 3. Releasing the lever at the desired height will lock the position
B Height of backrest
® Increasing the height of the backrest: 1. Place load on seat 2. Using
both hands, grip the backrest from below and push upwards 3. Release
once at the desired height = lock in position
® Release lock: 1. Push backrest all the way up, and the lock will release
2. Move backrest all the way down
D Depth of lumbar support on mesh versions (optional)
® 1. Disengage backrest 2. Turn inlay to increase or decrease support
C Inflation of the lumbar curve (optional)
® Lumbar curve activation: 1. Pump on the upper button until the desired
curvature is reached 2. Press on the lower button to reduce the lumbar
curvature
To Next Page
Loading...