What to do if my Seeley Braemar XE71-42G Temperature Controller air conditioner does not run?
If your Seeley Temperature Controller air conditioner isn't running, first, wait for the power to resume in case of a power failure. If the power is on, check the fuse or circuit breaker and replace or reset it if necessary. Also, ensure the thermostat is properly set for heating or cooling mode.
How to stop clicking sound from Seeley Temperature Controller?
The 'clicking' sound you hear from your Seeley Temperature Controller is normal. It is caused by the expansion or shrinkage of plastic parts due to sudden temperature changes during heating or cooling operation.
General| Model | XE71-42G |
|---|---|
| Temperature Range | 5-35°C |
| Housing Material | Plastic |
| Display Type | LCD |
| Output Type | Relay |
Cautionary notes for safe and proper use of the wired controller.
Overview of the wired controller's appearance and LCD icons.
Definitions and meanings of various icons displayed on the controller.
Explanation of each button's function and operation on the wired controller.
Instructions for turning the air conditioner unit on and off using the controller.
Steps to cycle through and select different operating modes (Cool, Dry, Fan, etc.).
Guide on how to increase or decrease the set temperature for the unit.
Instructions on selecting different fan speed levels for the air conditioner.
How to activate and set the vertical (up/down) swing function.
How to activate and set the horizontal (left/right) swing function.
Guide to navigate the menu and adjust various operational functions.
How to adjust fresh air volume settings to improve indoor air quality.
Instructions for activating and deactivating the sleep mode for optimized comfort.
How to activate the health function for improved air quality through ion generation.
How to use the I-Demand function to quickly reach the desired temperature.
Instructions for using the holiday function to maintain indoor temperature during absence.
How the unit automatically operates based on saved settings after power recovery.
How to use the save function for energy conservation by limiting temperature range.
How to activate auxiliary heating to enhance the unit's heating performance.
Explanation of the dry function for removing excess moisture from the indoor coil.
How to enable the quiet function for reduced fan noise and quieter operation.
How to set up reminders for cleaning the air conditioner filter based on usage.
How to switch the temperature display between Celsius and Fahrenheit scales.
Explanation of the low-temperature drying function and its behavior in dry mode.
Instructions for resetting the Wi-Fi function of the wired controller.
How the setback function maintains ambient temperature within a set range after shutdown.
How to adjust the upper and lower limit temperature values for the setback function.
Instructions for selecting the display language for the wired controller interface.
How to view the current operational status of the air conditioning unit.
How to access and view error codes and information when the unit reports a fault.
Overview of the timer function and the five types of timers available for scheduling.
How to set a single-occurrence timer for the unit's operation.
Guide to setting daily timers with up to 8 programmable segments for daily operation.
Instructions for programming weekly timer settings for the unit's operation over seven days.
How to set timer schedules for a two-week period, covering daily segments.
How to use the count down timer to turn the unit ON or OFF after a specified duration.
How to set the time display format to either 12-hour or 24-hour.
Instructions for setting the current date and time on the wired controller.
How to lock or unlock various controller functions to prevent unintended changes.
A structural overview of the controller's menu hierarchy and available functions.
How error codes are displayed on the controller when the unit encounters a problem.
A list of common error codes, their meanings, and potential causes.
Guide on how to check, clean, or replace the air conditioner's air filter.
Information regarding the importance of refrigerant and when to seek professional servicing.
Advice on checking the indoor coil's drain connections for blockages.
Recommendations for checking the outdoor unit for obstructions like plant growth.
To Next Page