Seepex BN 130-6LS User Manual (English)

To Next Page

Not Binding Operating

and Assembly Instruction

Progressive Cavity Pump

This operating and assembly instruction is only

for general information.

Type

BN 52-6LS up to 130-6LS

Issue 26.06.2017

Contents3
General Notes7
Safety and Warning Notes7
Warning Notes7
Danger Symbols7
Information Symbols8
Dangers that Can be Caused by the Machine8
Qualification of the Personnel8
Authorised People8
Tasks and Information for the Owner/Operators9
Safety Notes for Maintenance, Inspection and Assembly Work9
Personal Protective Equipment9
Safety and Protective Devices9
Designated Use10
General Description11
Mode of Action and Pumping Principle of the Seepex Pump11
Constructive Design11
Data Sheet13
Characteristic Curves13
Technical Data13
Safety15
Transport15
Symbols15
Unpacking the Machine15
Disposal16
Mounting Tools / Lifting Gear17
Space Requirement17
Dimension for Stator Replacement17
Assembly of the Complete Mounted Pump17
Assembly & Installation17
Power Supply of the Seepex Pump18
Pipelines18
Suction and Pressure Connection18
Pipeline Dimensions18
Master Copy19
Commissioning / De-Commissioning19
Measures before Commissioning21
Checking Pipelines21
Protective Devices on the Pump21
Electrical/Hydraulic Connections21
Direction of Rotation Check22
Additional Devices - Optional22
Initial Commissioning/Repeated Commissioning22
Pressure in the Suction and Pressure Connection22
De-Commissioning23
Switching off the Pump23
Emptying the Pump23
Removing the Pump24
Pipeline Dismantling24
Preservation/Storage of the Pump24
Preventive Measures25
Pump Down-Time25
Lubrication25
Maintenance25
Joint Grease26
Inspection26
Pump with Smart Conveying Technology - SCT29
Stator (601), Rotor (600) - Dismantling - SCT29
Preparing the Pump for Dismantling29
Stator (601) - Dismantling29
Rotor (600) - Dismantling30
Remove Upper Half of the Stator30
Dismantle Adjusting Segments30
Tool (Wz/Circlip Tongs 45°)31
Rotor (600) - Reassembly31
Tool (W29/Lifting Equipment Incl. Lashing Strap)32
Tool (W9/Mounting Lever)32
Stator (601) – Reassembly32
Smart Stator Setting35
Alignment of the Adjusting Segments (635)35
Adjusting Segment Basic Setting35
Fine Adjustment of the Pump Parameters36
Pump - Dismantling - SCT37
Pressure Branch (700) - Dismantling38
Suction Casing (500) - Dismantling38
Segment Retainer (671) - Dismantling - Pressure Branch39
Rotating Unit (RTE) – Dismantling39
Rotor (600), Coupling Rod (400), Plug-In Shaft (307) - Dismantlin40
Lantern (200)/Drive (ANT) - Dismantling40
Pump - Reassembly (SCT)40
Base Plate (GPU), Lantern (200), Drive Unit (ANT) – Reassembly40
Rotating Unit (RTE) - Reassembly41
Segment Retainer (671), Suction Casing (500) - Pre-Assembly41
Suction Casing (500) - Reassembly41
Segment Retainer (671), Pressure Branch (700) – Pre-Assembly42
Pressure Branch (700) – Reassembly42
Rotating Unit Individual Parts47
Dismantle Holding Band (406, 407)47
Dismantle Retaining Sleeve (401)47
Detach Joint47
Rotating Unit (RTE) – Preparing Component Parts for Assembly48
Prepare Rotor Head (640) for Assembly48
Prepare Coupling Rod (400) for Assembly48
Prepare Plug-In Shaft (307) for Assembly48
Rotating Unit (RTE) – Component Parts – Mounting49
Rotor Head (640) – Coupling Rod (400) – Connecting49
Rotor (600) Unhardened Material49
Rotor (600) Hardened Material49
Mount Universal Joint Sleeve (405) on Rotor Side50
Coupling Rod (400) – Connect Plug-In Shaft (307)50
Mount Retaining Sleeve (401) on Drive Side51
Mount Universal Joint Sleeve (405) on Drive Side51
Holding Band - Assembly53
Prepare the Holding Band53
Check the Holding Band53
Assemble the Holding Band53
Dismantling / Reassembly53
Cant up the Holding Band54
Shear the Holding Band54
Check the Holding Band after Assembly54
Shaft Sealing55
Operating Conditions and Material Combination55
Ordering Spare Parts59
Pumping Elements61
Miscellaneous Parts61
Small Wearing Parts Package61
Spare Parts62
Large Wearing Parts Package62
Special Tools63
Special Tools64
Accessories/Technical Information65
Associated Documents65

Need help?

Do you have a question about the Seepex BN 130-6LS and is the answer not in the manual?

Seepex BN 130-6LS Specifications

General

Brand	Seepex
Model	BN 130-6LS
Category	Water Pump
Language	English

Related product manuals

Seepex BN 130-6LS User Manual

Table of Contents

Seepex BN 130-6LS Specifications

Related product manuals