Use an antenna cable to connect the TV signal to the LCD TV´s TV CABLE terminal.
Connect the DC plug of the AC-DC adapter to the DC 12V port at the rear of the TV.
Connect the power cord to the AC-DC adapter and wall outlet.
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the power outlet when the LCD TV will
not be used for a long period of time.
The POWER button on the front panel is only used for switching the LCD TV
into standby, it does not disconnect the device from the main voltage. To
completely disconnect the main voltage, please remove the power plug from
the socket.
Press the INPUT button on the remote to display the Source List. Use the ▲▼ buttons to
select DTV/ATV, and press the OK button.
To Next Page
Loading...
Need help?
General
