The PICTURE menu includes the following options:
Picture Mode Cycles among display types: User/Mild/Standard/Dynamic
User: Allows to store your preferred settings.
Contrast Controls the difference between the brightest and darkest regions of
the picture.
Brightness Controls the overall brightness of the picture.
Colour Controls the colour intensity.
Sharpness Increase this setting to see crisp edges in the picture; decrease it for
soft edges.
Tint Controls the difference between the green and red regions of the
picture.
Colour Temperature Adjusts colour components independently to achieve a warm or cool
effect: Cool/Warm//Standard/User
▪ Warm: Increases red tint
▪ Cool: Increases blue tint
▪ User: Allows the user to adjust red, green and blue colour
component levels independently.
Aspect Ratio Selects through Wide mode settings :
In TV and video mode: Auto/4:3/16:9/ZOOM1/ZOOM2
In VGA/DVI mode:4:3/16:9
Noise Reduction
Select to reduce the noise level of connected equipment: Off/On
PICTURE
Picture Mode User
Contrast 50
Brightness 50
Colour 50
Sharpness 50
Tint 50
▼
EXIT
Quit Back Select
OK
The available menu options depend on the chosen signal source / menu
settings. All illustrations act as a referee.
To Next Page
Loading...
Need help?
General
