Need help?Do you have a question about the Sega Daytona USA and is the answer not in the manual?
Procedure for unpacking the machine's delivery cartons and checking contents.
Step-by-step guide to assemble the two main machine cabinets.
Instructions for attaching the billboard to the assembled main cabinets.
Steps for connecting the wire cover to the rear of the machine.
How to move and position the machine for play.
Verifies status of switches and VR values in the control panel.
Checks steering wheel reaction mechanism and DRIVE BD DIP switch settings.
Procedures for replacing and adjusting the steering wheel's Variable Resistor.
Procedure for unpacking the machine's delivery cartons and checking contents.
Step-by-step guide to assemble the two main machine cabinets.
Instructions for attaching the billboard to the assembled main cabinets.
Steps for connecting the wire cover to the rear of the machine.
How to move and position the machine for play.
Verifies status of switches and VR values in the control panel.
Checks steering wheel reaction mechanism and DRIVE BD DIP switch settings.
Procedures for replacing and adjusting the steering wheel's Variable Resistor.
General| Developer | Sega AM2 |
|---|---|
| Publisher | Sega |
| Release Year | 1994 |
| Platform | Arcade |
| Arcade System | Sega Model 2 |
| Genre | Racing |
| Modes | Single-player, Multiplayer |
| RAM | 8 MB |
| Resolution | 496 x 384 |
| Sound CPU | Motorola 68000 |
| Display | CRT |
| Players | 1-8 |
| Cabinet | Upright, Deluxe |
| Controls | Steering wheel, Gear shift, Pedals |
| Storage | ROM |
To Next Page
