THE SEGA SATURN UNIT
FRONT VIEW
1. Press the OPEN Button to open the CD door.
2. Insert a CD in the unit and close the CD Door.
3. The Cartridge Slot is used to insert accessories, such as the Back-up Memory.
4. Press the RESET Button to restart a game.
5. Press the POWER Button to switch the power on and off.
6. The Power Light lights when power is on.
7. Plug in a Sega Saturn Control Pad or other Sega Saturn peripherals in Control Port 1.
8. Use Control Port 2 to connect a Control Pad or other peripherals for multi-player games.
Rear View
1. Remove the Insulation Sheet before starting your Sega Saturn for the first time.
2. The Lithium battery powers the Sega Saturn internal memory.
3. Remove the Battery Cover in order to replace the Lithium battery, or insert the Video CD
Adaptor (sold separately).
4. Interface with your Sega Saturn by using future Sega technologies through the Communications
Socket!
5. Plug the Stereo Scart Cable (included) into the A/V OUT Socket.
6. Plug the Power Cord (included) into the Power Socket.
To Next Page
Loading...
Need help?
General
