Topper Mounting Instructions
For your own safety, please read through this instruction
manual that we have prepared for you thoroughly and
take precautions when using the product.
Note before assembling
1. Prior to assembly, you must check to see if you
have pre-drilled holes on the top of the Superbooth.
If you do not have pre-drilled holes please refer to
the Superbooth Topper Mounting Hole template.
2. Superbooth Topper needs at least 2 people for
assembly and to ensure your safety and the safety of
others around you when installing this product.
Tools required for assembling
• Wrench or Socket Set
• Hammer*
• Drill*
• 1/4” Bit*
• 2” Hole Saw*
Parts Included
• 4 - TV Bolts • 4 - Topper Bolts
• 4 - 1/4” T-Nuts• • 8 - Washers
• Metal Topper • 32” Monitor
• DVI to HDMI Adapter • Dual HDMI Splitter
• 2 - HDMI Cables • 8 Foot Power Cord
*Note: You will only need these tools and parts if your
Superbooth does not have pre-drilled holes on the top.
To Next Page
Loading...
Need help?
General