Sega SuperBooth User Manual

Forward
First, we would like to thank you very much for
purchasing the SuperBooth Interactive Photo Booth.
This product is a multi-player experience for families
and friends of all ages.
For your own safety, please read through this
instruction manual that we have prepared for you
thoroughly and take precautions when using the
product. We hope that you will become accustomed to
the product quickly.
Note before assembling
1. Prior to assembly, you must ensure there is
sufficient space for placing or shifting this product.
2. Superbooth needs at least 3 people for assembly and
to ensure your safety and the safety of others around
you when moving this product.
3. Prior to assembly, inspect and ensure all parts are
completely assembled and secure.
Tools required for assembling
• SuperBooth Manual
• SuperBooth Door Key [taped to door]
• Hex Key [taped to equipment tower]
• Electronic Screwdriver
• Scissors
*Note: Self prepare the above specified tools. Be careful not to
damage the product while using the tools
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Insert power
supply into
bottom of
camera
Mount camera onto
tripod head using the screw
slot on the the bottom
On the back wall of the booth,
take a tape measure and mark
the wall with a piece of tape at 75”
Zoom out as far as possible
and line the 75" mark at the
very top of the view finder
and lock the camera.
Have a subject stand against the
back wall inside the Superbooth
and zoom in all the way.
Focus the camera on
the subject and zoom out
all of the way.
Plug the USB cable
into the left side of the camera
Set the lens
focus mode
switch to
<
MF
>
Set the power
switch to
<
ON
>
Set the mode
dial to
<
M
>
Display the menu
screen by pressing
the menu button
On the menu screen
select Quality
Under the
toolbar select
“Auto power off”
Attach the lens
Align the lens’
white or red
index mark
with the mark
on the camera
Change this setting
to
<
OFF
>
(Default is L)
Change this setting
to
<
S1
>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Insert power
supply into
bottom of
camera
Mount camera onto
tripod head using the screw
slot on the the bottom
On the back wall of the booth,
take a tape measure and mark
the wall with a piece of tape at 75”
Zoom out as far as possible
and line the 75" mark at the
very top of the view finder
and lock the camera.
Have a subject stand against the
back wall inside the Superbooth
and zoom in all the way.
Focus the camera on
the subject and zoom out
all of the way.
Plug the USB cable
into the left side of the camera
Set the lens
focus mode
switch to
<
MF
>
Set the power
switch to
<
ON
>
Set the mode
dial to
<
M
>
Display the menu
screen by pressing
the menu button
On the menu screen
select Quality
Under the
toolbar select
“Auto power off”
Attach the lens
Align the lens’
white or red
index mark
with the mark
on the camera
Change this setting
to
<
OFF
>
(Default is L)
Change this setting
to
<
S1
>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Insert power
supply into
bottom of
camera
Mount camera onto
tripod head using the screw
slot on the the bottom
On the back wall of the booth,
take a tape measure and mark
the wall with a piece of tape at 75”
Zoom out as far as possible
and line the 75" mark at the
very top of the view finder
and lock the camera.
Have a subject stand against the
back wall inside the Superbooth
and zoom in all the way.
Focus the camera on
the subject and zoom out
all of the way.
Plug the USB cable
into the left side of the camera
Set the lens
focus mode
switch to
<
MF
>
Set the power
switch to
<
ON
>
Set the mode
dial to
<
M
>
Display the menu
screen by pressing
the menu button
On the menu screen
select Quality
Under the
toolbar select
“Auto power off”
Attach the lens
Align the lens’
white or red
index mark
with the mark
on the camera
Change this setting
to
<
OFF
>
(Default is L)
Change this setting
to
<
S1
>

Sega SuperBooth Specifications

General

Brand	Sega
Model	SuperBooth
Category	Digital Signage
Language	English