Lock box Setup Manual
[continued]
1. Place the lock box over the DBA so it rests on top of
the DBA and the front is flush with the back of the face.
2 Place the adjustable staple on the hasp and fully
extend the hasp and staple so it touches the white wall
of the TV mount.
3. Mark a line at the top of the adjustable staple.
4. Mount the adjustable staple to the white wall with the
enclosed mounting screws.
Use a drill to
insert screws
into each
corner of the
lock staple.
Mark a line
with a pencil.
To Next Page
Loading...