04 05
3 Diagram2 Packing List
Dashboard & Power Button
Battery
Compartment
Hub Motor
Brake Light
Buckle
Dashboard & Power Button
Electronic Throttle
Rear Fender
Quick Release Lever
Kickstand
Folding Mechanism
Front Fork
Stem
Drum Brake
Charge Port
Handlebar
Brake Lever
Bell
Snap Hook
Headlight
Speedometer: Display the current speed of the KickScooter, as well as to display error codes.
Modes: Three modes available. "ECO" for Energy saving mode (smooth acceleration, suitable for beginners), "D" for Standard
mode and "S" for Sport mode (powerful, only recommended for skilled riders).
Bluetooth: The icon indicates that the KickScooter has been successfully connected to the mobile device.
Error: The wrench icon indicates that the KickScooter has detected an error.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.
Power Button: Press the button to turn the KickScooter on; and press and hold the button for 3 seconds to turn the KickScooter off.
When the KickScooter is on, press the button to turn the headlight on/off, and double press to switch between modes.
Pedestrian mode: Makes pushing the KickScooter easier.
When unpacking your KickScooter, please verify that the above items are included in the package. If you are missing any
components, please contact your dealer/distributor or nearest service center (see Contact in the user manual). After
verifying that all components are present and in good condition, you can assemble your new KickScooter.
Please retain the box and packaging materials in case you need to ship your KickScooter in the future.
Remember to power off your KickScooter and unplug the power cord before assembling, mounting accessories, or
cleaning the mainframe.
Accessories
User MaterialsAssembled KickScooter
QUICK START
USER MANUAL
LIMITED WARRANTY
Power Cord
M5 Flathead Screw x 6
Hex Wrench
Battery Charger
(Sold Separately)
Valve Stem Extension
To Next Page
Loading...
Need help?
General
