• Keep your phone active and avoid switching to other apps.
• Stay within 6 m (19.7 ) of the mower during Assist Mapping.
• If the mower behaves abnormally, you can stop Assist Mapping at anytime and manually control the mower.
STOP
Two boundary options are available for you to choose, based on the actual layout of your lawn. The Standard Boundary is chosen by default and
it is recommended to use it for most scenarios. For instructions, follow the guidance in the app.
For lawns where the grass meets a pathway or pavement at an even level, you may need the mower to ride on the edge in order to fully trim the
grass right up to the non-grass area. For such cases, you can choose the Ride-on Boundary. For instructions, follow the guidance in the app.
Note: Ensure the gap between grass and non-grass areas is less than 1 cm (0.4 in).
The camera sensor on the mower captures the physical boundary of the lawn and Assist Mapping will be triggered. Therefore, the mower can
create boundaries automatically by navigating along the edges on its own, making mapping easier.
Remote control the mower towards the edges of the lawn. When the camera detects clear lawn edges, you can decide whether to start Assist
Mapping.
When the icon or on the upper right corner flashes, tap it and start Assist Mapping.
To Next Page
Loading...
Need help?
General
