When both the mower and the antenna are connected to the same satellite, it's called a 'Co-visible Satellite'. For accurate positioning of the
mower, it requires at least 5 Co-visible Satellites. Having more Co-visible Satellites means the positioning is better.
The Satellite Signal Analyzer helps you to check if your antenna and the charging station are installed at a proper location. Go to
Settings>MOWER>EFLS 2.0>Satellite Signal Analyzer.
If the result says there are enough Co-visible Satellites, it means that the location of the charging station and the antenna are OK. If the result
says there aren't enough Co-visible Satellites, it means you need to move the charging station and the antenna to different places. Aer that,
check the number of Co-visible Satellites again.
Analyze
N
S
W
Satellite Signal Analyzer
E
90°
65°
40°
15°
Please choose the location carefully. Once the map is saved, if the location of the charging station or GNSS antenna is changed, you
need to create a new map.
To Next Page
Loading...
