Fasten the new blades and screws (Torque: 1 N·m). Make sure the blades can pivot freely.
5
Note: Aer fastening the blades and screws the blades will still seem loose. This is normal as the blades need to spin during mowing. The blades
are intentionally designed to rotate freely when attached to the blade disc. During mowing, the spinning blade disc generates centrifugal force,
which causes the blades to point outward. This outward orientation allows the blades to effectively cut grass.
4.3 Transportation
To protect the mower, use the original packaging for long-distance transportation. Before liing, moving, or transporting the product, turn it
off. Handle with care and avoid violent force, such as throwing and heavy pressure. Never pick up or carry the mower while the motor is
running.
How to move or li properly
Carry the mower by the handle, with the blade disc facing away from your body.
CAUTION:
To avoid damage to the mower and/or the charging station, DO NOT li the mower by the handle when it's parked in the charging station. Pull off
the mower from the charging station before liing the mower.
To Next Page
Loading...
