EasyManua.ls Logo

Segway Villain SX10 - BASIC DRIVING GUIDE; Break-in Guidelines

Segway Villain SX10
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-9
Avoid parking on an incline if possible. If it's unavoidable, follow these
precautions:
1. Stop the engine.
2. Place the transmission in PARK.
3. Lock the parking brake.
4. Always block the rear wheels on the downhill side.
Break-in Guidelines
The engine break-in period is 10 working hours or a 186mi(300Km). During break-
in:
Avoid full throttle operation.
Avoid pressing the accelerator pedal past ¾ down.
Avoid continuous acceleration.
The brake needs a 124mi(200Km) run-in period.
New brakes will not operate at their maximum efficiency until the break-in period is
over. Brake performance may be compromised if not followed.
NOTICE
During this period, avoid full-throttle running, rapid
acceleration, and constant rpm operation.

Table of Contents

Related product manuals