SEI Industries Bambi Bucket Series Service Manual

Section 6: Troubleshooting Guide
Bambi Bucket Service Manual – Models 6072-1821 21
7. Check that the spring link is resting on the body of the
stop bolt and not on the head of the bolt, with the
control head sitting vertically.
8. Check for rifling in the trip block and deformation on
the top of the bullet.
Head Releases Dump Valve Prematurely
1. Tighten trip block bolts.
2. Check that links are below the centreline of the clevis
pins. Adjust links as required.
3. Check that the links do not catch on the bolt head.
4. Check the catch point for wear at the bullet. Replace
catch if necessary.
7
1
3
2
4

SEI Industries Bambi Bucket Series Specifications

General

Brand	SEI Industries
Model	Bambi Bucket Series
Category	Other
Language	English