Need help?Do you have a question about the SEI Industries BAMBI BUCKET SMALL Series and is the answer not in the manual?
Connects the Bambi Bucket to the helicopter's cargo hook.
Details electrical hookup for operating the solenoid and release mechanism.
Ensures correct bucket length to avoid tail rotor strikes.
Procedure to shorten cables if the bucket is too long for the helicopter.
Explains the IDS mechanism for automatically opening the bucket mouth.
Guidelines for flying the Bambi Bucket, including speed limits.
Pilot controls bucket capacity by varying water-pulling speed.
System to reduce bucket volume via a cinch strap.
Adjusts the IDS chain for lower fill settings and reduced stress.
Describes the bucket's ability to fill in shallow water.
Adjusting bucket loads for high elevation operations.
Using a Fireflex Tank as a dip tank for filling.
SEI's foam dispensing system for Bambi Buckets.
How height and airspeed affect the dump pattern.
Advice on dump speeds for familiarization.
Method to reduce dump valve opening to control water flow.
Adjusts the dump valve bulge for proper seal.
Explains FCAS use and its effect on valve sealing.
Adjusts valve "udder" by modifying the trip line length.
Adjusts "udder" after suspension cables have been shortened.
Adjusts purse lines for a good seal at the valve mouth.
Verifies purse line alignment for proper valve operation.
Diagnoses and resolves issues with the dump valve.
Diagnoses and resolves issues with the control head.
Procedure for replacing the trip line.
How to replace the spring power reel.
Procedure for replacing the catch component in the control head.
Details on replacing purse lines for various Bambi Bucket models.
Replacing suspension lines when frayed or kinked.
Instructions for replacing worn M-straps.
Steps to replace the dump valve assembly.
Repairing worn bottom loops.
Temporary repairs using glued patches.
Procedure for permanent patching using a hot air gun.
Temporary repair for rips/holes using repair clamps.
How to replace the IDS hub and spokes assembly.
Table of bucket capacities and their gross/empty weights.
Guidelines for matching Bambi Bucket models to helicopter types.
Illustrated diagram of control head components.
List of part numbers for the 6072-4453 control head.
Illustrated diagram of control head components.
List of part numbers for the 5566-7590 control head.
Illustrated diagram of control head components.
List of part numbers for the HL5000-HL9800 control head.
Illustrated diagram of shell and valve components.
List of part numbers for shell and valve.
Illustrated diagram of shell and valve components.
List of part numbers for shell and valve.
Illustrated diagram of rigging components.
List of part numbers for rigging.
Illustrated diagram of rigging components.
List of part numbers for rigging.
Illustrated diagram of IDS system components.
List of part numbers for the IDS system.
Illustrated diagram of IDS system components.
List of part numbers for the IDS system.
Diagram showing the Bambi Bucket carrying bag.
List of carrying bags and repair kit components.
General| Brand | SEI Industries |
|---|---|
| Model | BAMBI BUCKET SMALL Series |
| Category | Industrial Equipment |
| Language | English |
To Next Page