Name: SEI Industries BAMBI BUCKET SMALL Series
Brand: SEI Industries
Rating: 4 (1 reviews)

To Next Page

To Previous Page

The Bambi Bucket is designed to be effective with foam.

All materials used in the manufacture of the Bambi

Bucket are resistant the chemical action of foam.

CAUTION: After using foam or retardants,

cycle through several dumps with water only

or hose down with fresh water. This will

prolong the bucket life.

6.1 SACKSAFOAM

Foam Injection System

The Sacksafoam

is SEI Industries’ state of the art foam

dispensing system for use with your Bambi Bucket. This

system, exclusive to the Bambi, allows foam to be

dispensed into the bucket en route from the filling source

to the fire site.

There are four models of Sacksafoam to fit the full range

of Bambi Buckets. The operation of the Sacksafoam is

controlled by the pilot through a Control Unit, which is

mounted in the cockpit. This model of the Sacksafoam

contains the foam reservoir directly installed inside the

bucket.

Also available are the Sacksafoam II and III units, which

are self-contained units stowed onboard the helicopter.

The system is all housed in a foam-resistant case. With

the Sacksafoam II, the pilot still controls the foam

dispensing through the Control Unit. With the

Sacksafoam III, designed for medium and heavy lift

helicopters equipped with larger Bambi Buckets, the

operation of the system is performed by crew members

in the back. The Control Unit is mounted directly on the

case of the Sacksafoam III. See Table 2 for Sacksafoam

size requirements.

For further instructions on operating the Sacksafoam

units, please refer to the applicable Sacksafoam

Operator's Manual.

6. USING FOAM

Fig. 8.3 Sacksafoam Foam Injection System for the

Bambi Bucket

Model For Bambi Bucket Reservoir Capacity

USG Liters

Sacksafoam I

SFF01-8018 8096-1821 12 45

SFF01-2044 2024-4453 30 114

SFF01-5550 5566-HL5000 72 272

SFF01-7698 HL7600-HL9800 132 500

Sacksafoam II

SFF02-8044 6072-1821 10 38

SFF02-5598 1821-4453 25 94

Sacksafoam III

SFF03-6698 5566-HL9800 25 94

Sacksafoam Plus (for additional foam storage for SFII and SFIII)

SFF-PLUS 40 151

Table 2: Sacksafoam Models

Fig. 8.2 Sacksafoam III foam injection system for

medium and heavy-lift Bambi Buckets

SEI Industries BAMBI BUCKET SMALL Series User Manual

Table of Contents

Questions and Answers:

SEI Industries BAMBI BUCKET SMALL Series Specifications

Brand	SEI Industries
Model	BAMBI BUCKET SMALL Series
Category	Industrial Equipment
Language	English